New Type Can Water (without gas) Filling Machine

New Type Can Water (without gas) Filling Machine of Description:

New type can water (without gas) filling machine is a device developed on the basis of digesting and absorbing domestic and foreign (no gas) cans filling and sealing machines (sealing machines). The principle of atmospheric filling is adopted. When the empty can enters the lifting tray via the dial, the filling valve and the empty can are centered, the empty can is raised and sealed, and the valve port of the filling valve is automatically opened at the same time as the filling liquid level Stop filling when the air return pipe of the valve is blocked. The cans in the can are sent to the sealing machine head through the hook chain, and the lid is sent to the filling opening through the cap feeder and the pressure head. When the can supporting mechanism is raised, the pressure head presses the can mouth, and the sealing wheel is pre-topped and then sealed. After the can is sealed, new type can water (without gas) filling machine is pushed out by the head of the capping mechanism, and then enters the can-out transport.
The filling valve assembly consists of a liquid valve, a back (note) trachea, a valve, a centering cover, a lifting mechanism, an exhaust gas and a vacuum valve.

New type can water (without gas) filling line is very important for normal filling to stably control the liquid level in the cylinder. The whole liquid level control device is composed of reed tube float liquid level sensor, digital regulator, eccentric rotary valve (including valve positioner), etc.

New type can water (without gas) filling machine is suitable for a variety of non-gas beverages, such as mineral water, purified water, juice, milk, etc. New type can water (without gas) filling line can automatically complete the filling of beverages and the sealing of cans.

New Type Can Water (without gas) Filling Line of Features:

The main electrical components adopt the PLC, frequency converter and proximity switch of Japan’s Mitsubishi, the analog output of Germany’s Siemens and the solenoid valve of South Korea, which are designed by the company’s electrical engineers into a more reasonable configuration. The entire production speed can be customized on the touch screen as required. Set, all common faults will be automatically alarmed, and the corresponding fault cause location will be given. According to the severity of the fault, the PLC will automatically determine whether the host can continue to run or stop.

New type can water (without gas) filling equipment has the obvious characteristics of fast filling speed, consistent height from the liquid level in the tank to the filling mouth after filling, stable operation of the whole machine, good sealing quality, beautiful appearance, convenient use and maintenance, etc.

The high-speed filling valve is adopted, the liquid level is accurate and there is no liquid loss, so as to ensure the filling process requirements. The production capacity is frequency conversion speed regulation, and more than 95% of the appearance material is stainless steel, which ensures the beauty and hygiene requirements of the whole machine. In order to improve the vacuum degree in the tank, a steam injection device can be configured according to customer requirements, and a remote monitoring system can be equipped to ensure maximum technical support to customers.

New type can water (without gas) filling equipment is relatively simple to replace the bottle type. New type can water (without gas) filling equipment only needs to replace the screw cap and screw cap part of the star wheel and the arc guide plate, which makes it easier for customers to operate.

The parts in contact with the material are made of high-quality stainless steel 304, customers have requirements, can also be replaced by 316, no process dead angle, easy to clean.

New type can water (without gas) filling equipment adopts an efficient cap sorting system, complete automatic control and protection devices, and a complete overload protection device, which can effectively protect the safety of the equipment and the operator. The capping head adopts a magnetic constant torque device to ensure the quality of the capping. Damaged bottle caps. The control system has the functions of production speed control, cap missing detection, bottle jam stop and output counting. The whole machine operation adopts advanced touch screen control, which can realize man-machine dialogue operation.

Output can be customized according to customer needs, the output ranges from 1000-21000 cans per hour for customers to choose, welcome customers to come to consult and discuss.

In fact, Xinmao Beverage Machinery Co., Ltd. can not only provide canned beverage filling, but also provide a complete production line for beer filling machines, juice filling machines, and water filling machines and so on.

Zhangjiagang Xinmao Beverage Machinery Co., Ltd. is a professional manufacturer integrating research, development, and production of various beverage machinery. We provide customers with various desired solutions The company regards product quality as the life of enterprise development, has a perfect Quality assurance system, always abiding by the marketing concept of “Reputation First, Service Supreme, Quality Foremost”, the company will constantly promote new products, offer benefits to every customer, provide all-round technological services and supports for the users, and sincerely invite various friends to visit the company.